Mission Accomplished!

The switched transformer Inverted L matching circuit works as designed. The biggest take away is that now I can run full power on 80M, which was the biggest challenge. This morning I woke up, came out to the shack and did one last test and found that the 160M position was not isolated when I was switched in position 1 and 2 – so I had to add another relay:

I know it has something to do with the fact that I changed the 160M position (which only goes through the 1:1 current choke) to be a switched on position instead of a default position. The additional relay ensures that all three positions are isolated – that there is no way to transmit back into another current choke or UNUN. I’m still scratching my head – but I probably need to create a switching “truth table” that has the NC, NO and voltage ON positions – then I might see what I experienced with the DVM. It seems redundant to have that new relay . . .

The biggest deal is 80M, and the fact that now the tuner sees what makes it happy range wise – so there is no folding back over 300 – 400 watts, and I can run full power. When I look at the Rig Experts AA-30 plots I don’t see why this is the case, but on the air, everything is great.

So while it has all worked out – there are two “mysteries” to solve with data. And this will be fun, but for now I can kick back and enjoy success with something I designed from scratch and built that helps me in a very practical way.

The UNUN’s “almost” obviated the need for the AT2K, but the SPE Expert 1.3K ATU is just “OK” – it really can’t match a 3:1 – its more like 2:1 which is the biggest disappointment with this amplifier – the Elecraft KAT-500 is WAY better. I would not recommend the SPE ATU at all.

But all in all I’m happy with this latest project – I’ve learned a lot and really like a switched circuit way better than one that uses a Stepper motor as the URAT project did. I’ll be pursuing high power switched circuits from now on.

I have two 160M 1/4 wl stubs at 75 ohms and will play with feeding this contraption with those stubs. I also have a massive coil that Ed, AG6CX gave me – and will see if maybe a switched hairpin is another option.

Thankfully, while DXCC runs out of gas after so many years, experimenting and trying new things seems to be an endless pursuit – hence why this hobby is as much a journey and expedition as VK0EK was!

Solar Cycle 24, 3Y0Z, and the Downward Trend

Wow – it seems like we are closer to the bottom of the cycle than I would have expected. Look at the wild swings we have had in the last few months. Luckily, even with zero sunspots, 40M has been a beacon to ZS and V51 on the evening short path (only West Coast path for 3Y0Z) and the morning long path.

Can you believe it? 3Y0Z should be on the air in 6 weeks. I guess I will use the 11 days I have off between Christmas and New Years to get everything ready. I’ll use my “Air Boss” pneumatic antenna launcher to get that 17M EDZ up in the trees – and pray the squirrels don’t eat the rope before or during 3Y0Z.

I think 3Y0Z will be the last real hurrah for Cycle 24, at least on the high bands. There will be a time when even 20M will grow dim and I will re-purpose my 2 element 20M yagi to be a 30M Moxon – all aluminum since the dimensions width wise are about the same – all I need to do is get some really thin aluminum from DX Engineering and make the two side pieces.

This week we had a glimpse of some great Top Band conditions. JA, BA, HS, VK and JD1 were all quite good. So, as the high bands fade, the low bands will become good. Top Band for the most part has been disappointing this Fall – but I do remember how things can get better in the first 3 or 4 months of the year.

I think DXpeditions will start advertising what great low band antennas they have – and I think this will get more people on the low bands – if people have the room (and patience) to get something half way decent on 160 and 80. 40 and 30M are much easier to get a decent antenna in – phased verticals offer best bang for the buck where maintenance is very easy. Its amazing how much time I’ve spent on “simple” vertical low band antennas!

Gee Santa Claus – how about 8 Top Band QSO’s and ONE 3Y0Z QSL card? That would be swell!

The Greatest Invention: The Relay or Switch (?)

from “Lightning Man, the accursed life of Samuel F.B. Morse” by Kenneth Silverman

While working on my Inverted L switched transformer circuit:

And simultaneously reading how Alfred Vail helped Morse create a way to make the Telegraph viable, it occurred to me that without a relay – an electromagnetic switch – Telegraphy would not have taken off. The relay is what let you daisy chain circuits together that could power each segment with batteries up to a certain distance, and that the distance was greatly increased because the relay was the link between chained circuits.

One thing leads to another, and my circuit has logic to it – and so I started remembering that computers are nothing but massive chained circuits that is a set of switches. The switches being tiny inside semiconductors, and programmed just as I have programmed my little antenna matching circuit to behave based on chaining relays:

Some may say the battery – DC power – or AC electricity was the greatest invention, but without a switch, these would not be practical. The relay and Telegraph are certainly two of the most important inventions in human kind..

I grew up near the very historic Morristown, NJ and Speedwell Village, home of the Speedwell Ironworks where Morse’s first relay circuits were perfected by his assistant Alfred Vail – and with a design based on Joseph Henry’s work.

I am almost sure we went to Speedwell Village in Morristown on a field trip – we went to Morristown a lot and also went to Menlo Park, NJ where Edison had his lab. In fact, the first three semesters of College were spent at County College of Morris – also very close by. Synergy? There were so many great inventions from NJ – Bell Labs and AT&T, and the work by Major Armstrong in Alpine, NJ, etc, etc

Living history, when combined with building stuff in the Ham Radio hobby has a way of giving some very interesting perspective on the achievements and evolution of technology.

KY6R Inverted L Switched Transformer Match

I’m very pleased to have it all wired and working. My original plans did have a logic – wiring bug – the first relay really needed to be in a default NC mode (no power), and I needed a third voltage line to activate it to be in the 1:1 current choke – or direct feed to antenna mode. I tried to get away with 2 positive wires plus ground but that was wrong.

and the control box:

I’ll just need to fashion an antenna and ground “bus” out in the box and basically screw this plywood “breadboard” circuit into its home first thing Saturday morning.

The big test is to see if this circuit obviates the need for the Palstar AT2K. My gut feeling says maybe – it all depends on how broad  banded the transformers are. My theory is that I will be in the ballpark on all bands to make the SPE Exper 1.3 FK’s insternal ATU happy on the narrower bands, or at least within a segment of each band. I think I will need the AT2K tuner for “band excursions” – like going from the low CW end to a high SSB end on bands like 80 and 40.

Word to the wise – ALWAYS use spade lugs that are crimped and soldered for wiring relays – you will save your self a lot of hassle!

160M #92: JG8NQJ/JD1 – Minami Torishima

This one was so ESP, I can only hope I end up in his log. This is one of those where you always hear the CQ, part of his call and a fade happens in and around the return. You hear the right “cadence”, but its not the most solid QSO’s. But this is part of Top Band.

He is there for a few more days and while I can hear JA’s almost every morning on TB, this fellow is rumored to be running 50W to a low dipole.

I will keep trying with the hope I get a more solid QSO. But at this point – I just want to get to 100, so if its a “Forest Gump QSO” I’ll take it! K7ZV did hear my QSO, so there’s that anyway.

2018: My Year of Telegraphy

Cool items for a shadowbox that I will be putting together to kick the new year off right . . . 

2016 was my “Year of the Low band Receive Antenna”. 2017 was my “Year of Ham Meets Maker”. Inspired by a very interesting biography on Samuel FB Morse, and the pivotal role Telegraphy played in history, I’m calling 2018 “Year of Telegraphy”.

Sure, I will continue to work whatever I can on Top Band, and also hope to work 3Y0Z, and sure, I’ll putter around with antennas and electronic circuits, but since my wife Kat found a great book on the work of mid 1800 solar scientists and physicists, I’ve been wanting to read biographical histories of the people who invented or discovered things that we now take for granted in the modern world.

I will also combine this with the socio – economic aspects of how early technology shaped and formed the world as we know it today. I feel looking back will give a better perspective on where we might be headed. I have already found some things in the Morse biography where there were parallels to some of the craziness we have experienced politically in 2017, so in a way its a source of comfort.

 

Make America Sane Again

I’ve witnessed three pathological narcissists “hold court” for far too long and then, as these people always seem to do – implode under their own weight. Its agonizing to watch – about along the lines of the infamous OJ Simpson slow speed White Bronco chase.

Yesterday’s news gives me the first hope in a year that the tide is about to change in a yuge bigly way, and that sanity will again be fashionable in America.

At least I sure hope so.